Adafruit Parts Pal

LEDs and passives and transistors and switches and op-amps oh my! The Adafruit Parts Pal is the ultimate companion for an entry-level maker learning electronics. This kit is your friend whenever you need to build up a project. It contains many of our most popular components and prototyping parts all wrapped up in one parts pack so you can open up and dig right in.

Kit Contents:

Prototyping:

• 1x – Storage box with latch
• 1x –

  Half-size breadboard

• 20x –

  Male/male jumper wires – 3″ (75mm)

• 10x –

  Male/male jumper wires – 6″ (150mm)

LEDs:

• 5x –

  5mm Diffused green LEDs

• 5x –

  5mm Diffused red LEDs

• 1x –

  10mm Diffused Common-Anode RGB LED

Capacitors:

• 10x – 1.0uF Ceramic capacitors
• 10x –

  0.1uF Ceramic capacitors

• 10x – 0.01uF Ceramic capacitors
• 5x –

  10uF 50V Electrolytic capacitors

• 5x –

  100uF 16V Electrolytic capacitors

Resistors:

• 10x – 560 ohm 5% axial resistors
• 10x – 1K ohm 5% axial resistors
• 10x – 10K ohm 5% axial resistors
• 10x – 47K ohm 5% axial resistors

Semiconductors:

• 5x –

  1N4001 Diodes

• 5x –

  1N4148 Signal Diodes

• 5x –

  NPN Transistor PN2222 TO-92

• 5x – PNP Transistor PN2907 TO-92
• 2x –

  5V 1.5A Linear voltage regulator – 7805 TO-220

• 1x –

  3.3V 800mA Linear voltage regulator – LD1117-3.3 TO-220

• 1x – TLC555 wide-voltage range, low-power 555 Timer
• 1x –

  LM358 Dual operational Amplifier

Sensors:

• 1x –

  Photocell

• 1x –

  Thermistor (Breadboard version)

• 1x –

  Vibration sensor switch

• 1x –

  10K Breadboard trim potentiometer

• 1x – 1K Breadboard trim potentiometer

Mechanical:

• 1x –

  Piezo buzzer

• 5x –

  6mm Tactile switches

• 3x –

  SPDT slide switches

• 1x –

  40-pin Break-away male header strip

• 1x –

  40-pin female header strip

Technical Details